These sliders directly control the hardware. Therefore, they are
only active if your hardware actually does provide gain control and
the driver of your hardware implements it correctly. If your
particular hardware doesn’t support it, there’s nothing that one
can do about it. You should be careful to adjust the level of the
signal to the correct level before it reaches your hardware (or using
the controls of the hardware if it has some). Also, make sure that you
are actually using the correct sound input device. You can check
whether a particular device supports gain adjustment with the Audio
MIDI Setup
application in your Applications/Utilities folder
(select the device and check whether the input sliders there are
greyed out).
Note: The iMic has a little black switch that allows you to switch between microphone level input and line-in level input. Make sure that this switch is in the appropriate position.